Determination of bending radii based on study of deformed state in places of formation of bending radii of bent proofiles
Keywords:
curved profile, equal-shelf channel, deformed state, polar coordinate system, mechanics of a continuous deformable medium, minimum bending radiusAbstract
In this work, on the basis of the general expression for determining the polar radius r of an arbitrary material point under pure bending in the polar coordinate system, and using the basic provisions of the mechanics of a solid deformable medium, we determined the dependencies describing the components of the strain tensor in its cell. The components of the metal deformation tensor during profiling of a channel 150 × 100 × 2 mm were calculated for points located at the intersection of the axis of symmetry of the bending point and the boundary surfaces of the strip. It is established that, as a first approximation, it can be assumed that the deformed state of the bend during profiling is determined by the tangential and radial deformations, and the other components are equal to zero.
References
1. Trishevskiy O.I. Determination of the deformed state of the metal in the places of bending of long bent profiles. Proceedings of the 10th International scientific and practical conference “European scientific congress” (October 29-31, 2023) Barca Academy Publishing, Madrid, Spain. 2023. 533 p. IV International Scientific and Practical Conference.
2. Zienkiewicz R.L. Taylor and David Fox the finite element method for solid and structural mechanics. https://doi.org/10.1016/C2009-0-26332-X 2014. Elsevier Ltd
3. Trishevskiy O., Kaliuzhnyi O., Avtukhov A., Ashkelianets A., Ruzmetov A. Analysis of the influence of the main technological parameters of forming periodic corrugations in rolls on the accuracy of their periods. International Journal of Mechatronics and Applied Mechanics. 2023. 2023(14). P. 149–155.
4. Skoblo T., Klochko O., Trishevskij O., Belkin E., Deryabkina E. Modeling of degradation processes of cast iron carbide phase of mill rolls at operation. Lecture Notes in Mechanical Engineering. 2023. P. 128–136.
5. Trishevskij O., Kaliuzhnyi O., Yurchenko O., Levchenko V., Akhlestin O. Establishing patterns in the temperature distribution within a deformation zone during thin strip rolling. Eastern-European Journal of Enterprise Technologies. 2020. Vol. 2(5-104). P. 21–28.
